Best 6 Best Pressure Cooker Sticky Bbq Ribs Ever Recipes

PRESSURE COOKER RIBS

Steps:

• Prepare Baby Back Ribs: Remove the membrane from the back of the ribs with a butter knife and a paper towel.
• Dry Rub Baby Back Ribs: Mix all the dry rub ingredients and rub it all over the baby back ribs. Then, set aside while you prepare other ingredients.
• Pressure Cook Baby Back Ribs: Pour the homemade BBQ sauce into the pressure cooker. Add 2 - 3 drops of liquid smoke into the BBQ sauce. Place the baby back ribs into the BBQ sauce (see tips). *Pro Tip: If your Instant Pot is very sensitive to the "Burn Error", layer the Ketchup & Dijon mustard on top of the Ribs instead of mixing it into the BBQ sauce.Close lid and Pressure Cook at High Pressure for 16 - 25 minutes. Turn off the heat and Full Natural Release. Open the lid carefully.*Pro Tip: Adjust your cooking time according to your preference: 16 minutes (tender with a bit of chew) to 25 minutes (fall off the bone).
• Preheat Oven: While the baby back ribs is cooking in the pressure cooker, preheat the oven to 450°F.
• Set Aside Baby Back Ribs: Carefully place the pressure cooked baby back ribs on a chopping board with kitchen tongs. Cover it with aluminum foil and set aside.
• Filter the Fat (Optional Step): Filter the BBQ sauce with a strainer and remove the fat with an oil separator.
• Reduce BBQ sauce: Place roughly chopped carrots into the BBQ sauce and bring your BBQ sauce to a simmer (Instant Pot: Press Sauté button once, then Adjust button to Saute Less Function).Continue to reduce and thicken the BBQ sauce by simmering until desired thickness (~6 - 8 mins). Occasionally, stir with a wooden spoon. Taste the seasoning of the BBQ sauce. Stir in more brown sugar and additional 1 - 2 drops of liquid smoke if necessary.
• Apply Sauce and Finish in Oven or Grill: Brush the homemade BBQ sauce all over the baby back ribs on all sides including the bones with a silicone basting brush. Place the baby back ribs in the oven on the top rack for 10 - 15 minutes.
• Serve and Enjoy: Serve the baby back ribs immediately with more homemade BBQ sauce along with the carrots.

PRESSURE-COOKER BARBECUED BEEF RIBS

Steps:

• Select saute or browning setting on a 6-qt. electric pressure cooker and adjust for medium heat; add oil. Brown ribs in batches, adding additional oil as needed. Remove ribs. Brown onions. Add ribs back to the pressure cooker. Add water. Lock lid; close pressure-release valve. Adjust to pressure-cook on high for 40 minutes. Let pressure release naturally for 10 minutes and then quick-release any remaining pressure., In a small saucepan, combine the remaining ingredients; cook and stir over medium heat until heated through. Remove ribs from pressure cooker; discard cooking juices. Return ribs to pressure cooker. Pour sauce over top. Lock lid; close pressure-release valve. Adjust to pressure-cook on low for 5 minutes. Allow pressure to naturally release for 5 minutes and then quick-release any remaining pressure. Serve ribs with sauce.

PRESSURE COOKER STICKY TAMARIND BABY BACK RIBS

Steps:

• Cut the ribs into chunks of 2 or 3 ribs, depending on their size, and place them in a large bowl. Toss with 1 teaspoon salt, and set aside while you prepare the sauce.
• In a small bowl, combine the tamarind, orange juice, honey, soy sauce, lime zest and juice and star anise. Set aside.
• Using the sauté function, heat the oil in the pressure cooker. Stir in the shallots and cook until they are starting to brown, about 5 minutes. Stir in the ginger and garlic and cook until fragrant, another minute, then stir in the tamarind mixture. Bring to a simmer, and then scrape the sauce into the large bowl of ribs. Toss gently to combine.
• Arrange the ribs standing up along the outer edge of the pressure cooker, making a ring with the meat side of the ribs facing out. Continue with the remaining ribs, arranging them to make concentric circles. Pour any remaining sauce over the ribs, cover and cook on high pressure for 32 minutes. Allow the pressure to release naturally.
• Heat the broiler.
• Transfer the ribs, meat-side down, to a rimmed baking sheet. Turn the pressure cooker to the sauté function and cook to reduce the sauce until it's thick, about 15 minutes; spoon the fat off the top when finished. Taste the sauce, and adjust the seasoning or add more honey if necessary; then brush the ribs with the sauce. Broil the ribs until they are charred in spots, 1 to 3 minutes. Then flip them over, brush with more sauce, and broil on that side until charred. Serve immediately, with more sauce on the side.

PRESSURE COOKER HOT HONEY RIBS

Steps:

• Add the sweet and hot smoked paprika, mustard and garlic powders and several generous grinds of black pepper to a small bowl and mix to combine.
• Remove the ribs from the packaging and pat them dry with paper towels. (The easiest place to do this is the sink.) Turn the ribs over to remove the membrane that covers the back of the ribs: Grasp one end of the membrane with paper towels to keep your hands from slipping and pull; the membrane should pull right off in one or two sheets. (If it is not easy to pull off, you can skip this step.) Season the ribs all over, front and back, using about 1 tablespoon of salt per rack of ribs. Coat the ribs in the spice mixture, patting it all over both sides of the ribs.
• Put 2 cups of water into a 6- or 8-quart electric pressure cooker. Fit a steamer basket or trivet into the pot over the water. If you don't have one of those, roll up sheets of aluminum foil to make foil snakes about 1 1/2 inches in diameter. Coil the foil snakes into the bottom of the pot, covering the bottom of the pot with the coil. Make sure the top of the coil is just above the water level. This makes your own steamer trivet. Coil the ribs in the pot with the meaty sides facing the sides of the pot and the bones pointing up, standing them in a ring of concentric circles. Close the lid and cook on high pressure for 18 to 22 minutes. (See Tip)
• Meanwhile, make the hot honey: Combine the honey, chiles and lime peel in a small saucepan over medium heat. Let the mixture get very hot, until it simmers and then starts to foam, about 2 minutes. Remove it from the heat, pour it into a small heatproof bowl and set aside. (The honey can be made several days in advance. When it cools, cover it, and store it at room temperature.)
• When the cook time is over, turn off the pressure cooker and let the pressure release naturally for 15 minutes, then release the remaining pressure manually. Open the lid. The ribs should be very tender, but not falling apart. They are done when the meat shrinks back from the bones, the bones wiggle easily and a fork can easily shred an edge of the meat. If the meat is not tender, pressure cook on high for 1 to 3 more minutes, then immediately release the pressure manually.
• Line a sheet pan with foil. Using tongs, transfer the ribs to the sheet pan, meaty side up. Heat the broiler. Remove the lime zest from the honey (leave the chiles in) and stir the lime juice and apple cider vinegar into the honey mixture. Using a spoon, drizzle the honey all over the ribs, using about half the honey but leaving the chiles in the bowl.
• Broil the ribs until they are caramelized and sizzling, and lightly charred in spots, 2 to 3 minutes. (Check the ribs every 30 seconds or so to prevent burning, and rotate them to make sure that all the surfaces get caramelized.) Season the ribs with salt, then drizzle more of the hot honey and chiles over the ribs, to taste. Serve with any remaining hot honey on the side.

BEST PRESSURE COOKER STICKY BBQ RIBS EVER

Steps:

• Pour apple cider into an 8-quart multi-functional electric pressure cooker (such as Instant Pot®) to about 1/2 inch below the rack line. Stir in garlic powder, salt, paprika, and pepper. Place rack inside and heat the liquid completely; place ribs on rack.
• Close and lock the lid. Select high pressure according to manufacturer's instructions; set timer for 27 minutes. Allow 10 to 15 minutes for pressure to build.
• Preheat the oven to 350 degrees F (175 degrees C). Line a baking pan with a roasting rack.
• Pour about 2 cups BBQ sauce into a large cup. Add garlic, brown sugar, and chili sauce. Mix with a hand blender until completely smooth. Combine with the remaining BBQ sauce in a large bowl. Set aside to come to room temperature.
• Release pressure carefully using the quick-release method according to manufacturer's instructions, about 5 minutes.
• Remove ribs carefully and drain cooking liquid. Fully submerge each rib into the BBQ sauce. Place on the roasting rack so they are not touching. Brush extra BBQ sauce on top to make them extra sticky.
• Bake in the preheated oven until sauce is set, 15 to 20 minutes.

STICKIEST EVER BBQ RIBS WITH CHIVE DIP

Steps:

• Heat oven to 160C/140C fan/gas 3 and snugly fit the ribs into a roasting tin. Pour over the cola and enough water to cover the ribs, then cover the tin tightly with foil. Roast for 2-3 hrs, turning halfway through, until the ribs are really tender but not falling apart.
• Meanwhile, put all the sauce ingredients in a small saucepan. Gently heat, then bubble for about 2 mins, stirring.
• When the ribs are done, carefully lift each out of the tin and sit on kitchen paper to dry. Tip away the liquid and wipe out the tin. Put the dry ribs back in the tin and coat all over with the sticky sauce. Cover and chill for at least 1 hr to marinate, but better still up to 24 hrs. Can be frozen at this stage.
• Mix the dip ingredients together and chill until ready to serve.
• Heat the barbecue and wait for the flames to die down, or heat oven to 220C/200C/gas 7. Add the ribs (in a roasting tin, if using the oven) and cook for 20 mins, turning occasionally, and basting often with remaining sauce. When ribs are sticky, hot through and crisping on the outside, slice to serve. Scatter with sesame seeds, if you like, and plate up with any remaining sticky sauce, warmed, and the chive dip.