Best 7 Hard Maple Candy Recipes

HARD MAPLE CANDY

Steps:

• Grease a 15x10x1-in. pan with butter; set aside. In a large heavy saucepan, combine the sugar, corn syrup and water. Cook over medium-high heat until a candy thermometer reads 300° (hard-crack stage), stirring occasionally. , Remove from the heat; stir in maple flavoring. Immediately pour into prepared pan; cool. Break into pieces. Store in an airtight container.

PURE MAPLE CANDY

Steps:

• In a large heavy-bottomed saucepan, bring the maple syrup to a boil over medium-high heat stirring occasionally. Boil until syrup reaches 235 degrees F (110 degrees C) on a candy thermometer.
• Remove from heat and cool to 175 degrees F (80 degrees C) without stirring, about 10 minutes.
• Stir mixture rapidly with a wooden spoon for about 5 minutes until the color turns lighter and mixture becomes thick and creamy. Stir in chopped nuts, if desired.
• Pour into molds. Set aside to cool. Once cool, unmold candy. Store in airtight containers up to 1 month.

HARD CANDY

Steps:

• Fill a 15x10x1-in. pan with confectioners' sugar to a depth of 1/2 in. Using the handle of a wooden spoon, make a continuous curved-line indentation in the sugar; set pan aside. , In a large heavy saucepan, combine the sugar, corn syrup and water. Bring to a boil over medium heat, stirring occasionally. Cover and continue cooking for 3 minutes to dissolve any sugar crystals., Uncover and cook on medium-high heat, without stirring, until a candy thermometer reads 300° (hard-crack stage). Remove from the heat; stir in extract and food coloring if desired. , Carefully pour into a glass measuring cup. Working quickly, pour into prepared indentation in pan. Cover candy with confectioners' sugar. When candy is cool enough to handle, cut into pieces with a scissors. Store in a covered container.

HARD CANDY

Steps:

• In a medium saucepan, stir together the white sugar, corn syrup, and water. Cook, stirring, over medium heat until sugar dissolves, then bring to a boil. Without stirring, heat to 300 to 310 degrees F (149 to 154 degrees C), or until a small amount of syrup dropped into cold water forms hard, brittle threads.
• Remove from heat and stir in flavored extract and food coloring, if desired. Pour onto a greased cookie sheet, and dust the top with confectioners' sugar. Let cool, and break into pieces. Store in an airtight container.

MAPLE CANDY

Steps:

• Line the bottom and sides of a 9-by-5-inch loaf pan with parchment paper; brush the parchment with vegetable oil. Bring the maple syrup to a boil in a large saucepan over medium heat, then reduce the heat to medium low. Dip the back of a spoon in vegetable oil and run it over the top of the foam to help it subside. Increase the heat to medium and continue cooking until a candy thermometer registers 246 degrees F, 25 to 30 minutes. Pour the syrup into a heatproof bowl and let cool, 5 minutes.
• Beat the syrup with a mixer on medium-low speed until it starts to lighten in color and turn opaque, 30 seconds to 1 minute. Pour into the prepared pan and spread with an offset spatula; let cool completely, about 1 hour. Lift out of the pan and cut into pieces.

MAPLE LEAF CANDY

Steps:

• Gather the ingredients.
• If you are using candy molds, prepare by spraying them lightly with nonstick cooking spray.
• Take a paper towel and wipe off most of the spray; you want just a very thin coating of nonstick spray on the inside.
• Pour the syrup into a medium, heavy-bottomed saucepan and place it over medium heat. (The syrup will bubble up quite a bit, so make sure that the saucepan is large enough so that it will not easily boil over the top.)
• Bring the syrup to a boil; this can take about 15 to 20 minutes.
• Insert a candy thermometer and add the butter.
• Stir until the butter is fully melted and incorporated.
• Continue to cook the mixture until it reaches 240 F on the candy thermometer ( soft-ball stage ), about 35 to 40 minutes.
• Remove from the heat and allow it to cool for 2 to 3 minutes.
• Stir the candy vigorously with a wooden spoon until it thickens, lightens in color, and turns opaque, which should take about 3 to 5 minutes. Stop stirring once it reaches this point because if you continue to stir, it will start to set in the pan and become difficult to pour into the molds.
• Working quickly, spoon the candy into the candy molds.
• Smooth the tops with a small offset spatula.
• Once the candy is poured, it will start to set quickly. Let it sit at room temperature for about 10 minutes.
• Pop them out of the molds.

HARD MAPLE CANDY

Steps:

• 1. Grease a 15x10x1" pan with butter, set aside.
• 2. In a large heavy saucepan, combine the sugar, corn syrup, and water. Cook over medium high heat until a candy thermometer reads 300* (hard crack stage), stirring occasionally.
• 3. Remove from the heat; stir in maple flavoring. Immediately pour into prepared pan; cool. Break into pieces. Store in airtight container.