Best 5 Alton Brown Chili Recipes With Ground Beef Recipes

ALTON BROWN CHILI

Steps:

• Dry beef cubes with paper towels.
• In a large mixing bowl, toss the beef cubes with the vegetable oil and salt; set aside.
• Turn 6.5-quart Instant pot onto saute function. When the display reads "hot", add the beef in 3 batches and brown on all sides. Remove browned beef to a bowl and continue with remaining beef.
• Stir the beer into Instant pot and scrape up all the brown bits on the bottom of the pan (do not skip or the burn light may turn on).
• Add the browned beef back to the instant pot along with salsa, tortilla chips, chipotle peppers, adobo sauce, tomato paste, chili powder, and ground cumin and stir to combine.
• Place the lid on and set the "steam release" knob to "sealing". Press the "Manual" button and set to pressure cook on low for 25 minutes. Then turn the steam knob to venting to release the remaining pressure.
• After the pin drops, carefully open lid away from you (there will likely still be remaining steam). Stir the chili. Adjust seasoning, ladle into individual bowls and top with desired toppings.

PRESSURE COOKER CHILI

Steps:

• Place the meat in a large mixing bowl and toss with the peanut oil and salt. Set aside.
• Heat a 6-quart heavy-bottomed pressure cooker over high heat until hot. Add the meat in 3 or 4 batches and brown on all sides, approximately 2 minutes per batch. Once each batch is browned, place the meat in a clean large bowl.
• Once all of the meat is browned, add the beer to the cooker to deglaze the pot.
• Scrape the browned bits from the bottom of the pot. Add the meat back to the pressure cooker along with the salsa, tortilla chips, chipotle peppers, adobo sauce, tomato paste, chili powder, and ground cumin and stir to combine. Lock the lid in place according to the manufacturer's instructions. When the steam begins to hiss out of the cooker, reduce the heat to low, just enough to maintain a very weak whistle. Cook for 25 minutes. Remove from the heat and carefully release the steam. Serve immediately.

BEEF AND BEAN CHILI

Steps:

• Heat 2 tablespoons vegetable oil in a large pot or Dutch oven over high heat. Season the beef with salt and pepper. Add half the beef to the pot in a single layer and cook, turning, until browned, about 4 minutes. Remove with a slotted spoon to a bowl. Add 1 more tablespoon vegetable oil to the pot and brown the remaining beef; remove to the bowl.
• Reduce the heat to medium and add the remaining 2 tablespoons vegetable oil. Add the onion and cook, stirring occasionally, until softened and browned, about 5 minutes. Add the garlic and jalapeno and cook, stirring occasionally, until softened, about 2 minutes.
• Add the chili powder, cumin, 1/2 teaspoon salt and the tomato paste; cook, stirring, until deep red, about 2 minutes.
• Add the beef and any juices from the bowl, the tomatoes, beef broth and 2 cups water. Bring to a boil, then reduce the heat so the liquid simmers. Cook, stirring and scraping the bottom of the pot occasionally, until the meat is fork-tender, about 1 1/2 hours.
• Add the beans with their liquid and simmer until the chili is thickened, 20 to 30 minutes. Season with salt, pepper and more chili powder. Top as desired.

ALL AMERICAN BEEF TACO

Steps:

• Make a taco mold by rolling out aluminum foil and folding it over in 10-inch increments until you have a 4-sheet-thick piece of foil. Fold the large foil square in half horizontally, bringing the bottom to the top, and then turn 90 degrees. Crimp over the top and bottom edges by 1 inch, and then fold over the sides by 1 inch. Place the aluminum foil roll or a narrow rolling pin into the center of the foil square and bring the sides together to create a hollow, narrow tube to mold the taco, making sure it can stand up on the long side.
• Heat the oven to 250 degrees F.
• Heat the peanut oil in a 12-inch cast iron skillet over medium heat until it reaches 350 degrees F on a deep-fry thermometer, about 5 minutes. Adjust the heat to maintain the temperature.
• Shape 1 tortilla around the aluminum foil mold, forming a taco shape. Use tongs to hold up the sides against the mold and put the bottom of the tortilla into the hot oil and fry for 20 seconds. Lay 1 side of the tortilla down in the hot oil and fry for 30 seconds. Flip the tortilla over and fry for an additional 30 seconds. Remove the taco shell to a cooling rack set over a newspaper lined half sheet pan and cool for 30 seconds before removing the mold. Sprinkle the hot tortillas with kosher salt, to taste. Repeat frying procedure with the remaining tortillas. Keep the taco shells warm in the heated oven while preparing the filling.
• Drain all but 2 tablespoons of the peanut oil from the skillet and return to medium heat. Once the oil shimmers, add the onion and cook until softened and lightly browned around the edges, about 3 to 4 minutes. Add the ground meat, 1 teaspoon salt, and garlic. Cook until browned, about 3 to 4 minutes, stirring occasionally, to break up the meat. Add Taco Potion and beef broth. Bring to a simmer and cook, uncovered, until sauce is slightly thickened, 2 to 3 minutes.
• Assemble each taco with meat mixture, panela, jalapeno slices, lettuce, tomatoes, and cilantro. Serve immediately.
• Put all of the ingredients in a small jar and shake to combine. Store in an airtight container for up to 1 month.

AB'S CHILI POWDER

Steps:

• Place all of the chiles and the cumin into a medium nonstick saute pan or cast iron skillet over medium-high heat. Cook, moving the pan around constantly, until you begin to smell the cumin toasting, approximately 4 to 5 minutes. Set aside and cool completely.
• Once cool, place the chiles and cumin into the carafe of a blender along with the garlic powder, oregano, and paprika. Process until a fine powder is formed. Allow the powder to settle for at least a minute before removing the lid of the carafe. Store in an airtight container for up to 6 months.